Edmar Metric LLC

For a Quote contact Edmar Metric LLC   info@EdmarMetric.com


Level controls propeller for powders or granules

The level controls propeller indicators SEM are employed for level control in tanks that contain powders or granular. 

The indicator’s working is very simple: a synchronous motor that rotates at low speed activates a propeller placed inside the tank to be controlled. In lack of material the motor is under voltage and the propeller revolves. 

The presence of material round the propeller bridles the rotation provoking control contacts exchange; another microswitch induces then the dump of the motor’s feeding voltage. 

Electric circuit opening and closing causes the command of an acoustic or visual signal, or the silo’s load, the conveyors and worm conveyors stop etc.

➤ Version: SEM 24VCC/S with inverter board uses a synchronous AC motor (brushless) driven by an electronic board, integrated in the housing, which converts the tension from DC to AC. The use of a brushless motor solves the typical problem of DC motors which have a limited lifetime due to the wear on the brushes.

General features:

• Aluminum casting case: hermetic protection for working in the open.

• Dust protection.

• The steel shaft is mounted on two ball bearings.

• Aluminum propeller.

• 6 holes plate for assembly; with threaded boss 1”1/2 inch gas, supplied on request.

• The shaft with propeller is 15, 30, 50, 70, 100 cm long.